Auxiliary Heater for 1988 Mercedes-Benz 300CE
No.
Part # / Description / Price
Price
14
Clamp 
Mercedes-Benz
Mercedes-Benz Description: BRACKET TO HEATER UNIT
Diameter: 70-90mm
Material thickness: 1mm
Width across flats: SW8. COLD-AIR SCOOP TO FENDER, RIGHT
Diameter: 70-90mm
Material thickness: 1mm
Width across flats: SW8. Refrigerant reservoir to wheel well
Diameter: 70-90mm
Material thickness: 1mm
Width across flats: SW8. FUEL FILTER
Diameter: 70-90mm
Material thickness: 1mm
Width across flats: SW8.
Diameter: 70-90mm
Material thickness: 1mm
Width across flats: SW8. COLD-AIR SCOOP TO FENDER, RIGHT
Diameter: 70-90mm
Material thickness: 1mm
Width across flats: SW8. Refrigerant reservoir to wheel well
Diameter: 70-90mm
Material thickness: 1mm
Width across flats: SW8. FUEL FILTER
Diameter: 70-90mm
Material thickness: 1mm
Width across flats: SW8.
$19.50
$19.50
83
Plug Mercedes-Benz
Mercedes-Benz Description: Tail lamp cable harness plug-connection,12-pole. Inboard/heater-operation cable-harness plug-connection.
86
$2.20
95
Clamp Mercedes-Benz
Mercedes-Benz Description: 20 - 32 MM. 23-30 MMDiameter: 20-32mmMaterial thickness: 1mmWidth across flats: SW8. Between piping and circulation pump. 23-30 MMDiameter: 20-32mmMaterial thickness: 1mmWidth across flats: SW8. FROM ENGINE TO CHECK VALVE. 23-30 MMDiameter: 20-32mmMaterial ...
$4.60
$4.60
203
Hexagon Head Bolt Mercedes-Benz
Mercedes-Benz Description: DOOR HANDLE
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. FASTENER AT SHELL
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm.
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. FASTENER AT SHELL
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm.
$14.50
$14.50
206
Clamp Mercedes-Benz
Mercedes-Benz Description: Fuel-oil pump. 10mm. Fuel hose. From engine return line to tank. Heater unit. Connection to feed pump.
255
Hexagon Head Screw Mercedes-Benz
Mercedes-Benz Description: M5x10.5. At blower;temperature sensor ventilation. Bracket to fire wall. Heat shield mounting. Control unit. Screening plates. Main floor,front right. Return line to partition panel.
$0.70
$0.70
258
Line Mercedes-Benz
Mercedes-Benz Notes: ONLY FOR USE WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL
Description: Fuel line to floor,right.
261
Clamp Mercedes-Benz
Mercedes-Benz Notes: NOT FOR USE WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL
Description: Fuel line to floor,right. Fuel lines to vehicle floor. Brake line to cross member.
$1.20
$1.20
270
Clamp Mercedes-Benz
Mercedes-Benz Notes: ONLY FOR USE WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL
Description: Fuel line under main floor. Brake and fuel lines to vehicle floor.
279
Tensioner Mercedes-Benz
Mercedes-Benz Notes: NOT FOR USE WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL
Description: Underbody left. Fuel line to floor,right. To mount fuel lines. In wheelhouse front left. To firewall and longitudinal member. Brake line to cross member.
$5.25
$5.25
280
$4.90
281
Clamp Mercedes-Benz
Mercedes-Benz Notes: NOT FOR USE WITH AUTOMATIC LIMITED-SLIP DIFFERENTIAL
Description: Condensed water drain. Compressor-to-condenser refrigerant line to condenser. Starting cable to side member.
$4.70
$4.70
285
Clamp Mercedes-Benz
Mercedes-Benz Notes: USED WITH HEATED WINDSHIELD WASHER
Description: At motor. 14-16 mm. Left rear brake cable. 14-16 mm. Line to line. 14-16 MM. Oil line connection. 14-16 mm.
$8.00
$8.00
288
Diesel Exhaust Fluid (Def) Injector Feed Line Bracket Mercedes-Benz
Mercedes-Benz Notes: USED WITH HEATED WINDSHIELD WASHER
$3.70
$3.70
324
Bleed Valve Mercedes-Benz
Mercedes-Benz Description: Heater unit outlet to de-aeration and timing valves. Oil drain. At right side member.
$16.00
$16.00